GME13.12
First edition
Published on: 31/01/2023
26H126 crown finish - Dimensions - alternative 'P' point
Scope of application
This data sheet provides specifications and dimensions of the 26H126 mm shallow crown finish for glass bottles with a modified 'P' point.
Table of contents
1. Scope
2. Definition
3. Dimensions
3.1. Shoulder and bore
3.2. Finish profile
3.3. Crimping edge (“P” Point”)
3.4. Glass sealing surface (Detail X)
4. Related documents
4.1. Standards
4.2. Cetie
2. Definition
3. Dimensions
3.1. Shoulder and bore
3.2. Finish profile
3.3. Crimping edge (“P” Point”)
3.4. Glass sealing surface (Detail X)
4. Related documents
4.1. Standards
4.2. Cetie
5. Datasheet history
History
First edition: 01/2020
Document suppressed from the library and replaced with data sheet GME13.10 - 26 H 126 AND 26 H 180 CROWN FINISHES - DIMENSIONS - ALTERNATIVE "P" POINT
First edition: 01/2020
Document suppressed from the library and replaced with data sheet GME13.10 - 26 H 126 AND 26 H 180 CROWN FINISHES - DIMENSIONS - ALTERNATIVE "P" POINT
Contributors
ARDAGH GLASS GERMANY, ARDAGH GLASS PACKAGING SOUTH AFRICA, BA GLASS PORTUGAL, BRITISH GLASS, BUNDESVERBAND GLASINDUSTRIE, CSVMF, ENCIRC GLASS,FEVE, GERRESHEIMER BELGIUM, GERRESHEIMER GERMANY, HEINZ GLAS, O-I MANUFACTURING FRANCE, O-I MANUFACTURING ITALY, O-I MANUFACTURING UK, POCHET DU COURVAL, SAVERGLASS, STOELZLE-OBERGLAS, VERALLIA FRANCE, VERALLIA GERMANY, VETROPACK, VIDRALA, WIEGAND-GLASHUTTENWERKE
Document under responsibility of working group:
Glass wg3
WG chair: Niall MC GRATH - ENCIRC GLASS
This permanent group is dedicated to the creation and revision of Cetie's "GME*" neck finishes data sheets, and also to the revision of equivalent neck finishes data sheets previously submitted to official standardisation (ISO and/or CEN), dedicated to the production of glass bottles and jars for the food and beverage sectors. These neck finishes data sheets concern the following applications: ROPP, aluminum screw caps, crown caps, twist-off caps, cork or synthetic stoppers, bar-top, or swing stoppers.
*Initiated by the glass industry in the 1960s, the acronym 'GME' stands for 'Glass Manufacturing Experimental'. The idea was that Cetie, as an unofficial standards body, would only publish 'experimental' data sheets, before submitting these to the official standards bodies. At the same time, in the USA, the acronym 'GME' was also used. As the original meaning was lost over time, this nomenclature for Cetie's glass finishes documents has been, later on, applied to the PET finish data sheets.
*Initiated by the glass industry in the 1960s, the acronym 'GME' stands for 'Glass Manufacturing Experimental'. The idea was that Cetie, as an unofficial standards body, would only publish 'experimental' data sheets, before submitting these to the official standards bodies. At the same time, in the USA, the acronym 'GME' was also used. As the original meaning was lost over time, this nomenclature for Cetie's glass finishes documents has been, later on, applied to the PET finish data sheets.
Document suppressed from library
