GME40.04
Revision I
Published on: 13/09/2022
Flaconnage - Neck finish for crimpless pump
Scope of application
Specifications and dimensions of a series of neck finishes for pump systems with external fixation, without crimping, on glass bottles.
This geometry is dedicated to SP7 and SP8 from Silgan. Other crimpless pumps are adapted to standard EN 14854 - GLASS PACKAGING - DIMENSIONS OF NECK FINISHES FOR AEROSOL AND SPRAY GLASS CONTAINERS.
This geometry is dedicated to SP7 and SP8 from Silgan. Other crimpless pumps are adapted to standard EN 14854 - GLASS PACKAGING - DIMENSIONS OF NECK FINISHES FOR AEROSOL AND SPRAY GLASS CONTAINERS.
Table of contents
1. Scope
2. Definition
3. Dimensions
4. Related documents
4.1. Standards
4.2. Cetie
5. Data sheet history
2. Definition
3. Dimensions
4. Related documents
4.1. Standards
4.2. Cetie
5. Data sheet history
History
First edition: 07/2007
Revision 1: 09/2022 Clarification of the scope and in § 3 in the table add dimensions for size 11.
First edition: 07/2007
Revision 1: 09/2022 Clarification of the scope and in § 3 in the table add dimensions for size 11.
Contributors
APTAR BEAUTY FRANCE, BORMIOLI LUIGI, BUNDESVERBAND GLASINDUSTRIE, CHANEL PARFUMS BEAUTÉ, COSTER GROUP, COTY FRANCE S.A. (PARIS), ESTEE LAUDER COMPANIES, GERRESHEIMER BELGIUM, GERRESHEIMER GERMANY, HEINZ GLAS, L'OREAL, PARFUMS CHRISTIAN DIOR, POCHET DU COURVAL, SAVERGLASS, SGD PHARMA, SHISEIDO INTERNATIONAL, SILGAN DISPENSING SYSTEMS, STAZIONE SPERIMENTALE DEL VETRO, STOELZLE MASNIERES PARFUMERIE, STOELZLE-OBERGLAS, VERESCENCE FRANCE
Document under responsibility of working group:
Flaconnage geometry
WG chair: Lorenzo PASQUALI - BORMIOLI LUIGI S.p.A.
This joint group aims to produce dedicated documentation on glass flacons for the cosmetics, perfume, and pharmacy sectors:
- Cetie 'GME'* neck finishes data sheets concerning glass crimping neck finishes (FEA), screw neck finishes, neck finishes for pumps and snap-on neck finishes, etc.
- All data sheets of the DT15 series, identifying tolerances and standard test methods applicable to molded glass flacons;
- Data sheets concerning critical visual defects of flacons, neck finishes nomenclature, etc.
- Guide of crimping recommendations.
*Initiated by the glass industry in the 1960s, the acronym 'GME' stands for 'Glass Manufacturing Experimental'. The idea was that Cetie, as an unofficial standards body, would only publish 'experimental' data sheets, before submitting these to the official standards bodies. At the same time, in the USA, the acronym 'GME' was also used. As the original meaning was lost over time, this nomenclature for Cetie's glass finishes documents has been, later on, applied to the PET finish data sheets.
