GME40.07
First edition
Under development

Flaconnage - Glass finish for screw pump - CV finish

Scope of application

This data sheet is based on the INE BV95045 data sheet. It specifies the dimensions of a screw finish for glass flacons for the perfume or cosmetics industry. It applies to glass containers with a nominal diameter of the neck finish around 13, 15, 17, 18 or 20 mm. The designation is "CV 13", "CV 15", "CV 17", "CV 18" and "CV 20".

Table of contents

1. Scope
2. Dimensions
3. Related documents
3.1 Standards 
3.2 Cetie
3.3 Others
4. Data sheet history
This data sheet is currently in drafting stage. For more information, contact us.

Contributors

AGI GLASPAC, ANFEVI, APTAR FRANCE, ARDAGH GLASS PACKAGING  SOUTH AFRICA, AROL, BERLIN PACKAGING, BORMIOLI LUIGI, BUNDESVERBAND GLASINDUSTRIE, CHANEL PARFUMS BEAUTÉ, COSTER GROUP, COTY FRANCE S.A. (PARIS), ESTEE LAUDER COMPANIES, GERRESHEIMER BELGIUM, GERRESHEIMER GERMANY, HEINZ GLAS, L'OREAL, PARFUMS CHRISTIAN DIOR, POCHET DU COURVAL, SAVERGLASS, SGD PHARMA, SHISEIDO INTERNATIONAL, SILGAN DISPENSING SYSTEMS, STAZIONE SPERIMENTALE DEL VETRO, STAZIONE SPERIMENTALE DEL VETRO, STOELZLE MASNIERES PARFUMERIE, STOELZLE-OBERGLAS, VERESCENCE FRANCE 

Document under responsibility of working group:

Flaconnage geometry
WG chair: Lorenzo PASQUALI - BORMIOLI LUIGI S.p.A.
This joint group aims to produce dedicated documentation on glass flacons for the cosmetics, perfume, and pharmacy sectors:
  • Cetie 'GME'* neck finishes data sheets concerning glass crimping neck finishes (FEA), screw neck finishes, neck finishes for pumps and snap-on neck finishes, etc.
  • All data sheets of the DT15 series, identifying tolerances and standard test methods applicable to molded glass flacons;
  • Data sheets concerning critical visual defects of flacons, neck finishes nomenclature, etc.
  • Guide of crimping recommendations.
*Initiated by the glass industry in the 1960s, the acronym 'GME' stands for 'Glass Manufacturing Experimental'. The idea was that Cetie, as an unofficial standards body, would only publish 'experimental' data sheets, before submitting these to the official standards bodies. At the same time, in the USA, the acronym 'GME' was also used. As the original meaning was lost over time, this nomenclature for Cetie's glass finishes documents has been, later on, applied to the PET finish data sheets.
Document under drafting stage
Cover - GME40.07 - Flaconnage - Glass finish for screw pump - CV finish