DT36.00
Revision I
Published on: 08/12/2022
Test method on glass flacon decorative elements - Resistance to immersion in water
Scope of application
The aim is to assess the resistance of the decorative elements or lacquering of a glass flacon to periods of immersion in water.
The principle involves immersing the tested component in water for 6 hours at ambient temperature and then performing an adherence test.
This test applies to all types of lacquered (sprayed, metallised) and decorated (screen-printed, hot-stamped or pad-printed) items.
The principle involves immersing the tested component in water for 6 hours at ambient temperature and then performing an adherence test.
This test applies to all types of lacquered (sprayed, metallised) and decorated (screen-printed, hot-stamped or pad-printed) items.
Table of contents
1. Scope
2. Responsibility
3. Operating principle
3.1. Equipment
3.2. Sampling frequency and sample size
3.3. Standard approval method
3.3.1. Total immersion test
Method A: Simple adhesive tape test
Method B: Cross-cutting before the adhesive tape test
Interpretation and recording of results
2. Responsibility
3. Operating principle
3.1. Equipment
3.2. Sampling frequency and sample size
3.3. Standard approval method
3.3.1. Total immersion test
Method A: Simple adhesive tape test
Method B: Cross-cutting before the adhesive tape test
Interpretation and recording of results
3.3.2. Partial immersion test
4. Related documents
4.1. Standards
5. Data sheet history
4. Related documents
4.1. Standards
5. Data sheet history
History
First edition: 05/2020
Revision I:12/2022
Experimental status removed: 09/2022
§3.2 Deletion of the table and replacement with text for clarification (Experimental removed September 2022) §3.2 Deletion of the table and replacement with text for clarification.
First edition: 05/2020
Revision I:12/2022
Experimental status removed: 09/2022
§3.2 Deletion of the table and replacement with text for clarification (Experimental removed September 2022) §3.2 Deletion of the table and replacement with text for clarification.
Contributors
BORMIOLI LUIGI, BUNDESVERBAND GLASINDUSTRIE, CHANEL PARFUMS BEAUTÉ, COTY FRANCE S.A. (PARIS), ESTEE LAUDER COMPANIES, GERRESHEIMER BELGIUM, GERRESHEIMER GERMANY, GUERLAIN, HEINZ GLAS, JACOMO PRODUCTION, L'OREAL, ORIFLAMME, PARFUMS CHRISTIAN DIOR, POCHET DU COURVAL, SAVERGLASS, SGD PHARMA, SHISEIDO INTERNATIONAL, STAZIONE SPERIMENTALE DEL VETRO, STOELZLE MASNIERES PARFUMERIE, STOELZLE-OBERGLAS, VERESCENCE FRANCE, WEILBURGER
Document under responsibility of working group:
Flaconnage decoration
WG chair: Lionel NIZAN - VERESCENCE FRANCE (MERS LES BAINS)
This joint group aims to produce dedicated documentation on test methods related to decorative elements on glass flacons, primarily for the cosmetics and perfume sectors.
