GME30.28
Revision I
Published on: 01/04/2016
PET finish 26/22-12-3/6.5
Scope of application
Specifications and dimensions of the 26 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages. This finish can be used for water with or without the introduction of nitrogen (internal Overpressure should not exceed 1 bar). The dimension (12.0) is the height in millimetres from the top of the finish to the bottom of the support ledge.
This finish is designed to take a tamper-evident plastic closure only. During first opening, the tamper-evident band will generally separate from the closure shell.
This finish is designed to take a tamper-evident plastic closure only. During first opening, the tamper-evident band will generally separate from the closure shell.
Table of contents
1. Scope
2. Definitions
3. Requirements
4. Cross-related document
5. Data sheet history
2. Definitions
3. Requirements
4. Cross-related document
5. Data sheet history
History
First edition: 09/2009
Revision I: 04/2017
Data sheet replaced by standard EN 16067 - PACKAGING - RIGID PLASTIC CONTAINERS - PET FINISH 26,7 (LEAD 9,00)
First edition: 09/2009
Revision I: 04/2017
Data sheet replaced by standard EN 16067 - PACKAGING - RIGID PLASTIC CONTAINERS - PET FINISH 26,7 (LEAD 9,00)
Contributors
ACQUA MINERALE SAN BENEDETTO,ACTEGA, ALPLA WERKE Alwin Lehner, AMCOR FLEXIBLES CAPSULES, AMCOR RIGID PACKAGING, APTAR GROUP, AROL S.p.A., ASTRA PLASTIQUE, BERICAP, BERLIN PACKAGING, BETAPACK, BRITVIC SOFT DRINKS, CAP SUSTAINABLE SOLUTIONS, COCA-COLA SERVICES, CORVAGLIA MOULD, DANONE EAUX FRANCE, DAVID ROSE PACKAGING SOLUTIONS, DAVID SYRETT PACKAGING CONSULTANCY Ltd, ECKES GRANINI, ETS ANDRE ZALKIN & CIE, GENOSSENSCHAFT DEUTSCHER BRUNNEN, HEINEKEN GLOBAL SUPPLY CHAIN, HEUFT, HUSKY INJECTION MOLDING SYSTEM, INTRAVIS GmbH, KRONES, LOGOPLASTE, LYONDELLBASELL INDUSTRIES - BASELL POLYOLEFINE, NESTLE WATERS MANAGEMENT & TECHNOLOGIES, NESTLÉ PRODUCT TECHNOLOGY CENTRE, NETSTAL Maschinen, OBRIST CLOSURES SWITZERLAND, OTTO HOFSTETTER, PEPSICO RUSSIA, PLASTISUD, REFRESCO FRANCE, RETAL LITHUANIA, SACMI IMOLA, SELIG FRANCE, SGT France, SIDEL BLOWING & SERVICES, SILGAN WHITE CAP MANUFACTURING, SIPA, SPA MONOPOLE, SUMITOMO (SHI) DEMAG PLASTICS MACHINERY, SUNTORY BEVERAGES & FOOD EUROPE, TORRENT INNOVA, TREFFPACK, UNITED CAP FRANCE, UNITED CAP WILZ, UNIVERSAL CLOSURE LIMITED, WISECAP GROUP, Z-MOULDS
Document under responsibility of working group:
PET plenary
WG chair: Alessandro FALZONI - SACMI IMOLA
This joint group is in charge of all GME data sheets ("Finish data sheets"), dedicated to the geometry of PET neck finishes and their related documents. These data sheets are related to finishes dedicated to the beverage industry (such as soft drinks, mineral water & wine), packaged in an aseptic environment and/or with nitrogen injection, and to the food industry (e.g. edible oils, vinegars, and sauces) and allowing to receive mainly plastic caps.
Document suppressed from library
