GME13.04
Revision I
Published on: 19/01/2024
29mm sparkling wine finish
Scope of application
This data sheet gives dimensions and specifications of the 29 mm glass finish for bottles intended for sparkling wine produced by a closed tank method.
This finish is designed to take a natural cork or synthetic cork stopper.
This finish is designed to take a natural cork or synthetic cork stopper.
Table of contents
1. Scope
2. Requirements
3. Documents in reference
3.1. Cetie
4. Data sheet history
2. Requirements
3. Documents in reference
3.1. Cetie
4. Data sheet history
History
First edition: 10/1998
Revision I: 05/2018
Document reviewed without any modification: 01/2024
First edition: 10/1998
Revision I: 05/2018
Document reviewed without any modification: 01/2024
Contributors
ARDAGH GLASS GERMANY, ARDAGH GLASS PACKAGING SOUTH AFRICA, BA GLASS PORTUGAL, BRITISH GLASS, BUNDESVERBAND GLASINDUSTRIE, CSVMF, ENCIRC GLASS,FEVE, GERRESHEIMER BELGIUM, GERRESHEIMER GERMANY, HEINZ GLAS, O-I MANUFACTURING FRANCE, O-I MANUFACTURING ITALY, O-I MANUFACTURING UK, POCHET DU COURVAL, SAVERGLASS, STOELZLE-OBERGLAS, VERALLIA FRANCE, VERALLIA GERMANY, VETROPACK, VIDRALA, WIEGAND-GLASHUTTENWERKE
Document under responsibility of working group:
Glass wg3
WG chair: Niall MC GRATH - ENCIRC GLASS
This permanent group is dedicated to the creation and revision of Cetie's "GME*" neck finishes data sheets, and also to the revision of equivalent neck finishes data sheets previously submitted to official standardisation (ISO and/or CEN), dedicated to the production of glass bottles and jars for the food and beverage sectors. These neck finishes data sheets concern the following applications: ROPP, aluminum screw caps, crown caps, twist-off caps, cork or synthetic stoppers, bar-top, or swing stoppers.
*Initiated by the glass industry in the 1960s, the acronym 'GME' stands for 'Glass Manufacturing Experimental'. The idea was that Cetie, as an unofficial standards body, would only publish 'experimental' data sheets, before submitting these to the official standards bodies. At the same time, in the USA, the acronym 'GME' was also used. As the original meaning was lost over time, this nomenclature for Cetie's glass finishes documents has been, later on, applied to the PET finish data sheets.
*Initiated by the glass industry in the 1960s, the acronym 'GME' stands for 'Glass Manufacturing Experimental'. The idea was that Cetie, as an unofficial standards body, would only publish 'experimental' data sheets, before submitting these to the official standards bodies. At the same time, in the USA, the acronym 'GME' was also used. As the original meaning was lost over time, this nomenclature for Cetie's glass finishes documents has been, later on, applied to the PET finish data sheets.
