FS06.00
First edition
Published on: 26/01/2024
Conformity assessment/Certification
Scope of application
Requirements for conformity with Directive 94/62/EC.These are set down in Annex III - EC document 96/C 382/05.
Table of contents
1. Requirements for conformity with Directive 94/62/EC
2. Technical Data required
2.1. Technical data for the design and manufacture of individual jobs
2.1.1. Design
2.1.2. Manufacture
2.2. Technical Data for glass
2.2.1. Results of tests to confirm that the concentration of heavy metals as specified in Directive 94/62/EC have been met should be available.
3. Technical Standards
3.1. Standards concerning recycling/reuse objectives of the Directive
3.2. Standards concerning the quality and "fitness for purpose" of the bottles
2. Technical Data required
2.1. Technical data for the design and manufacture of individual jobs
2.1.1. Design
2.1.2. Manufacture
2.2. Technical Data for glass
2.2.1. Results of tests to confirm that the concentration of heavy metals as specified in Directive 94/62/EC have been met should be available.
3. Technical Standards
3.1. Standards concerning recycling/reuse objectives of the Directive
3.2. Standards concerning the quality and "fitness for purpose" of the bottles
4. Record retention time
4.1. Records related to design - 2.1.1.
4.2. Records related to manufacture - 2.1.2.
4.3. Records relating to Heavy Metal concentration
5. Certificate of Conformity
5.1. A written certificate of conformance should be made available as appropriate and when required.
5.2. Certificates which may be required
5.3. The glass manufacturer will determine who authorises the certificate and where it will be retained.
4.1. Records related to design - 2.1.1.
4.2. Records related to manufacture - 2.1.2.
4.3. Records relating to Heavy Metal concentration
5. Certificate of Conformity
5.1. A written certificate of conformance should be made available as appropriate and when required.
5.2. Certificates which may be required
5.3. The glass manufacturer will determine who authorises the certificate and where it will be retained.
History
First edition: 01/2000
Document withdrawn on 01/2024 - Document helping to answer the requirements of Directive 94/62/CE, which is being replaced by the new Packaging and Packaging Waste Regulation (in 2025)
First edition: 01/2000
Document withdrawn on 01/2024 - Document helping to answer the requirements of Directive 94/62/CE, which is being replaced by the new Packaging and Packaging Waste Regulation (in 2025)
Contributors
ARDAGH GLASS GmbH, BA GLASS PORTUGAL, BRITISH GLASS, BUNDESVERBAND GLASINDUSTRIE E.V., CAN PACK S.A., ENCIRC GLASS, GERRESHEIMER BELGIUM, HEINZ GLAS GmbH & Co. KG aA GERMANY, O-I MANUFACTURING FRANCE, O-I MANUFACTURING ITALY, O-I MANUFACTURING UK, SAVERGLASS FRANCE, STOELZLE-OBERGLAS GmbH, VERALLIA FRANCE, VERALLIA ITALY, VERALLIA SPAIN, VERALLIA GERMANY, VETROPACK HOLDING AG, VIDRALA S.A, WIEGAND-GLASHUTTENWERKE GmbH
Document under responsibility of working group:
Glass wg1+4
WG chair: Arnaud JANIN - VERALLIA FRANCE
This permanent group is dedicated to a wide range of topics downstream of the production of glass bottles and jars dedicated to the food and beverage industries:
- Surface treatments, marking, labelling;
- Testing methods (impact, headspace, internal pressure, etc.);
- Nomenclatures (of finishes, jars, bottles, and visual defects, etc.);
- Quality management (food and beverage safety, best practices, regulations).
Document suppressed from library
