GME32.04
First edition
Published on: 01/03/2009

PET PCO finish 28/22-17-1/2.7

Scope of application

Specifications and dimensions of the single start thread lightweight 28 mm PET PCO screw finish for the beverage industry. This finish has vent slots and is designed to take a tamper-evident plastic closure only. During first opening, the tamper-evident band will separate from the closure shell and stay on a one-way bottle neck or like bottles in the returnable market, the tamper-evident band will tear but will remain connected to the closure shell.
This Cetie document is no longer available. For more information, refer to PCO - 1881 neck finish developed by ISBT (International Society of Beverage Technologists), as illustrated in drawing N° 3784253. ISBT technical drawings can be downloaded from https://www.isbt.com/threadspecs-downloads.asp.

Table of contents

1. Scope
2. Dimensions
3. Recommendations
4. Documents in reference
5. Data sheet history
History
First edition: 03/2009 (Experimental)
Data sheet replaced by standard PCO - 1881 VOLUNTARY STANDARD 28MM CSD FINISH - DRAWING N° 3784253 (ISBT - International Society of Beverage Technologists)

Document under responsibility of working group:

PET plenary
WG chair: Alessandro FALZONI - SACMI IMOLA
This joint group is in charge of all GME data sheets ("Finish data sheets"), dedicated to the geometry of PET neck finishes and their related documents. These data sheets are related to finishes dedicated to the beverage industry (such as soft drinks, mineral water & wine), packaged in an aseptic environment and/or with nitrogen injection, and to the food industry (e.g. edible oils, vinegars, and sauces) and allowing to receive mainly plastic caps.
Document suppressed from library
Cover - GME32.04 - PET PCO finish 28/22-17-1/2.7