GME33.03
Revision I
Published on: 22/12/2022
PET neck finish 43/37-14,7-1/4,24-1,25 turns for HPC applications
Scope of application
This document aims to fully specify a PET Neck Finish standard for the HPC market with a nominal crest of thread diameter of 43 mm and denominated as 43/37-14,7-1/4,24-1,25 turns (for standard neck finish nomenclature, please refer to DT23.03 - PET FINISHES GLOSSARY AND NOMENCLATURE). It also gives an explanation regarding the dimensions and neck features applied as well as dimensions for the exemplary preforms weight range from 28 g up to 83 g for the option with Ø Z = 42,80 and from 28 g up to 92 g for the option Ø Z = 47.
Table of contents
1 Scope
2 Definitions
3 Dimensions
3.1 Option 1 – Ø Z = 42,80
3.2 Option 2 – Ø Z = 47,00
4 Features
5 Preform exemplary weight range
5.1 Option 1 – Ø Z = 42,80
5.2 Option 2 – Ø Z = 47,00
6 Related documents
2 Definitions
3 Dimensions
3.1 Option 1 – Ø Z = 42,80
3.2 Option 2 – Ø Z = 47,00
4 Features
5 Preform exemplary weight range
5.1 Option 1 – Ø Z = 42,80
5.2 Option 2 – Ø Z = 47,00
6 Related documents
6.1 Cetie
7 Data sheet history
7 Data sheet history
History
First edition: 10/2020 (Experimental)
Revision I: 12/2022 (Experimental) Harmonisation of the GME series GME33.01 - PET NECK FINISH 27/22-13,5/1/4,24-1,5 TURNS FOR HPC APPLICATIONS through GME33.05 - PET NECK FINISH 20/15-11,5-1/3,18-1,5 TURNS FOR HPC APPLICATIONS
First edition: 10/2020 (Experimental)
Revision I: 12/2022 (Experimental) Harmonisation of the GME series GME33.01 - PET NECK FINISH 27/22-13,5/1/4,24-1,5 TURNS FOR HPC APPLICATIONS through GME33.05 - PET NECK FINISH 20/15-11,5-1/3,18-1,5 TURNS FOR HPC APPLICATIONS
Contributors
ALPLA, APTAR ITALY, BOLTON MANITOBA, CDS VIROPLASTIC, HUSKY INJECTION MOLDING SYSTEM, INTRAVIS, JOHNSON & JOHNSON, KRONES AG , LC IPC SOLUTIONS, LYONDELLBASELL, L’ORÉAL, L’ORÉAL, OTTO HOFSTETTER AG, PLASTIPAK, PROCTER & GAMBLE, RETAL, SERIOPLAST, SERIOPLAST GLOBAL SERVICES, SIDEL BLOWING & SERVICES, SIPA, STACKTECK, SUMITOMO (SHI) DEMAG PLASTICS MACHINERY, UNILEVER UK CENTRAL RESOURCES LIMITED, UNITED CAP FRANCE
Document under responsibility of working group:
HPC (home and personal care)
WG chair: To be elected - -
This working group is dedicated to developing industry voluntary standards for PET finishes and, where appropriate, complete sealing systems for home and personal care (HPC) markets.
The group develop also guidance and harmonised test methods to facilitate technical exchanges within the HPC PET packaging value chain.
This group is not active at the moment and may be reactivated depending on a member's request.
The group develop also guidance and harmonised test methods to facilitate technical exchanges within the HPC PET packaging value chain.
This group is not active at the moment and may be reactivated depending on a member's request.
