DT40.00
First edition
Published on: 16/09/2020
Datamatrix hot-end laser marking on glass containers
Scope of application
This data sheet gives recommendations for a harmonised coding system and the positioning of the laser codes on containers according to product types and production conditions.
Table of contents
Contributors
1. Introduction
2. Scope
3. Laser marking system
3.1. Objectives of the system
3.2. Definitions
3.3. Standard DataMatrix coding
3.4. Other code possibilities
4. Recommended locations of codes
5. Hot-end laser marking equipment
1. Introduction
2. Scope
3. Laser marking system
3.1. Objectives of the system
3.2. Definitions
3.3. Standard DataMatrix coding
3.4. Other code possibilities
4. Recommended locations of codes
5. Hot-end laser marking equipment
6. Patent
7. Referenced documents
8. Data sheet history
7. Referenced documents
8. Data sheet history
History
First edition: 09/2020
NOTE: In table 2, please note that cavities are inverted (Cavity 1 should be Outer and cavity 4 should be Inner). This will be corrected at the next revision of the document.
First edition: 09/2020
NOTE: In table 2, please note that cavities are inverted (Cavity 1 should be Outer and cavity 4 should be Inner). This will be corrected at the next revision of the document.
Contributors
AB-INBEV / GPDIL, ADELPHE, AMCOR FLEXIBLES CAPSULES, ARDAGH GLASS, BA GLASS, BUNDESVERBAND GLASINDUSTRIE E.V. (Federal Association of the German Glass Industry),, COCA-COLA SERVICES, E. REMY MARTIN & CO., EMHART GLASS, ENCIRC GLASS, GERRESHEIMER GERMANY, HEYE INTERNATIONAL, KONATIC, MOET & CHANDON, NESTLE WATERS MANAGEMENT & TECHNOLOGIES S.A.S, O-I MANUFACTURING FRANCE, SAVERGLASS, STOELZLE MASNIERES PARFUMERIE S.A.S., TIAMA, VERALLIA FRANCE, VERALLIA GERMANY, VETROPACK, VIDRALA, WIEGAND-GLASHUTTENWERKE
