GME14.12
Revision II
Published on: 24/01/2025
26 h 126 twist crown finish - Reduced bore
Scope of application
This data sheet provides specifications and dimensions of the 26 H 126 mm shallow twist crown finish for glass bottles with a bore reduced from 19,8 mm ±0,3 mm to 19,1 mm ±0,3 mm.
This finish with reduced bore should be used with prior mutual agreement between the bottler, the bottle manufacturer and the cap supplier.
This finish with reduced bore should be used with prior mutual agreement between the bottler, the bottle manufacturer and the cap supplier.
Table of contents
1. Scope
2. Definition
2.1. Twist crown finish
3. Dimensions
4. Requirements
5. Reference documents
5.1. Standards
5.2. Cetie
6. Data sheet history
2. Definition
2.1. Twist crown finish
3. Dimensions
4. Requirements
5. Reference documents
5.1. Standards
5.2. Cetie
6. Data sheet history
History
First edition: 11/2019
Revision I: 11/2020 -Experimental status removed: 10/2022
Revison II: 01/2025 - In the section Cetie document change GME14.02 (withdrawn from Cetie library) to GME14.00 (combining former GME14.01 and GME14.02).
First edition: 11/2019
Revision I: 11/2020 -Experimental status removed: 10/2022
Revison II: 01/2025 - In the section Cetie document change GME14.02 (withdrawn from Cetie library) to GME14.00 (combining former GME14.01 and GME14.02).
Contributors
ARDAGH GLASS GERMANY, ARDAGH GLASS PACKAGING SOUTH AFRICA, BA GLASS PORTUGAL, BRITISH GLASS, BUNDESVERBAND GLASINDUSTRIE, CSVMF, ENCIRC GLASS,FEVE, GERRESHEIMER BELGIUM, GERRESHEIMER GERMANY, HEINZ GLAS, O-I MANUFACTURING FRANCE, O-I MANUFACTURING ITALY, O-I MANUFACTURING UK, POCHET DU COURVAL, SAVERGLASS, STOELZLE-OBERGLAS, VERALLIA FRANCE, VERALLIA GERMANY, VETROPACK, VIDRALA, WIEGAND-GLASHUTTENWERKE
Document under responsibility of working group:
Glass wg3
WG chair: Niall MC GRATH - ENCIRC GLASS
This permanent group is dedicated to the creation and revision of Cetie's "GME*" neck finishes data sheets, and also to the revision of equivalent neck finishes data sheets previously submitted to official standardisation (ISO and/or CEN), dedicated to the production of glass bottles and jars for the food and beverage sectors. These neck finishes data sheets concern the following applications: ROPP, aluminum screw caps, crown caps, twist-off caps, cork or synthetic stoppers, bar-top, or swing stoppers.
*Initiated by the glass industry in the 1960s, the acronym 'GME' stands for 'Glass Manufacturing Experimental'. The idea was that Cetie, as an unofficial standards body, would only publish 'experimental' data sheets, before submitting these to the official standards bodies. At the same time, in the USA, the acronym 'GME' was also used. As the original meaning was lost over time, this nomenclature for Cetie's glass finishes documents has been, later on, applied to the PET finish data sheets.
*Initiated by the glass industry in the 1960s, the acronym 'GME' stands for 'Glass Manufacturing Experimental'. The idea was that Cetie, as an unofficial standards body, would only publish 'experimental' data sheets, before submitting these to the official standards bodies. At the same time, in the USA, the acronym 'GME' was also used. As the original meaning was lost over time, this nomenclature for Cetie's glass finishes documents has been, later on, applied to the PET finish data sheets.
