GME30.30
First edition
Under development

PET finish 33/28-12.9-2/5

Scope of application

This data sheet provides specifications and dimensions of the 33 mm screw finish with two (2) thread starts for flat waters and non-carbonated beverages.
This finish can be used for aseptic filling and filling with introduction of nitrogen (the internal pressure should not exceed 1 bar).
This finish is designed to take a tamper evident plastic closure only.
During first opening, the tamper evident band will separate from the closure shell and stay on a one way bottle neck or like bottles in the returnable market, the tamper evident band will tear but will remain connected to the closure shell.
History
Data sheet initiated in 2011 and abandoned. 
The GME30.30 PET FINISH 33/28-12.9-2/5 was considered too close to the 32mm (the GME30.31 PET Finish 32/26-15,8-2/2,7-(HF) ), and much more delicate to produce. The group has chosen not to publish this data sheet.

Contributors

ACQUA MINERALE SAN BENEDETTO, ACTEGA DS GmbH, ALPLA KUNSTSTOFF GmbH, ALPLA WAIDHOFEN GmbH, ALPLA WERKE Alwin Lehner GmbH & Co KG, AMCOR FLEXIBLES CAPSULES, AMCOR FLEXIBLES CAPSULES (SAINT-SEURIN), AMCOR RIGID PACKAGING PLC, APTAR FREYUNG GmbH, AROL S.p.A., BERICAP GmbH & Co. KG (BUDENHEIM), BERLIN PACKAGING FRANCE, BERLIN PACKAGING GERMANY, BERLIN PACKAGING NETHERLANDS B.V., BETAPACK, BRASSERIES KRONENBOURG SAS, BRITVIC SOFT DRINKS Ltd, CAP SUSTAINABLE SOLUTIONS, CITEO, COCA-COLA GmbH, COCA-COLA SERVICES FRANCE S.A., COCA-COLA SERVICES S.A/N.V. , CORVAGLIA MOULD AG, DAVID ROSE PACKAGING SOLUTIONS, DAVID SYRETT PACKAGING CONSULTANCY Ltd, ECKES GRANINI FRANCE, ECKES GRANINI GERMANY, ELIPSO (Fédération des entreprises de l'emballage plastique), EPG Service GmbH, ETS ANDRE ZALKIN & CIE, GENOSSENSCHAFT DEUTSCHER BRUNNEN EG, GEORGES MONIN S.A.S., HEINEKEN GLOBAL SUPPLY CHAIN, HEUFT FRANCE, HEUFT SYSTEMTECHNIK GmbH, HEUFT USA, HUSKY INJECTION MOLDING SYSTEM S.A , INTRAVIS GmbH, KRONES, LOGOPLASTE, LUCOZADE RIBENA SUNTORY LIMITED, LYONDELLBASELL INDUSTRIES - BASELL POLYOLEFINE GmbH, NESTLÉ PRODUCT TECHNOLOGY CENTRE KONOLFINGEN (SUISSE), NESTLE WATERS MANAGEMENT & TECHNOLOGIES S.A.S, NETSTAL Maschinen AG, OBRIST CLOSURES SWITZERLAND GMBH, OTTO HOFSTETTER AG, PEPSICO RUSSIA, PLASTISUD, REFRESCO FRANCE, RESILUX (BELGIUM), RETAL BALTIC FILMS, RETAL LITHUANIA, SACMI IMOLA, SAEME SAS Danone Eaux France, SECURE INDUSTRIES PVT LTD, SELIG FRANCE, SGT France, SIDEL BLOWING & SERVICES, SILGAN CLOSURES UK, SILGAN WHITE CAP MANUFACTURING GmbH, SIPA S.p.a., SOLOCAP-MAB S.A.S, SPA MONOPOLE S.A., SUMITOMO (SHI) DEMAG PLASTICS MACHINERY GMBH, SUNTORY BEVERAGES & FOOD EUROPE (FRANCE - AIX EN PROVENCE), TORRENT INNOVA S.A., TREFFPACK – C.E. GÄTCKE'S GLAS GESELLSCHAFT Mbh, UNITED CAP FRANCE, UNITED CAP WILZ, UNIVERSAL CLOSURE LIMITED (UCL), WISECAP GROUP, Z-MOULDS GmbH,

Document under responsibility of working group:

PET plenary
WG chair: Alessandro FALZONI - SACMI IMOLA
This joint group is in charge of all GME data sheets ("Finish data sheets"), dedicated to the geometry of PET neck finishes and their related documents. These data sheets are related to finishes dedicated to the beverage industry (such as soft drinks, mineral water & wine), packaged in an aseptic environment and/or with nitrogen injection, and to the food industry (e.g. edible oils, vinegars, and sauces) and allowing to receive mainly plastic caps.
Document suppressed from library
Cover - GME30.30 - PET finish 33/28-12.9-2/5